So assuming the shocks that got replaced were original, they lasted 149,619 miles and about 14 years. The ones on 2.0 leaked but these never did. Then again, 3.0's and Mom's '11 had a front coil spring break, but 2.0 never had than happen despite being driven aggressively for years.
Welcome to the Crown Vics ETC blog!
On April 6, 2000, I purchased a 1998 Ford Crown Victoria LX HPP with 23,490 miles. I decided to start a little website for it featuring a running log of my experiences with the car. Vic 1.0 was retired in 2015 due to rust and electrical issues. Vic 2.0 was a 2006 P71 in Blue Pearl that belonged to my boyfriend. It was a Ford demo and never saw actual police use. It was damaged in September of 2018 with well over 186,000 miles. It was replaced by Vic 3.0 in October 2018, a 2008 P71 in Silver Birch with 120,971 miles. To read posts prior to 2010, click a link at right, or go to Crown Vics, ETC.
Showing posts with label springs. Show all posts
Showing posts with label springs. Show all posts
Sunday, June 5, 2022
149,619 Mile Update: SHOCKING! ... again... really...
Vic 3.0 had new OEM shocks/struts installed by Taxi Guy... without a lift, thanks to two of his being down and a third having a car already on it. BUT it was done and I no longer need to think about a front coil spring taking out a fender! Amazingly, there isn't a "night & day" difference, but things like bridge expansion joints are way nicer to drive over. I'll have a better idea of the difference once the less-than-perfectly-balanced snow tires are off, which should be done today, and new tires are installed (hopefully later this week if Taxi Guy's lifts are repaired).
Monday, May 28, 2018
SHOCKING! Front End Edition 2018
Wellp, after 12 years and 184,944 miles, the front shocks in Vic 2.0 were finally replaced. A while ago I noticed a stain appearing on the driveway under the front passenger side of the car. Then I noticed some odd handling characteristics. Things finally got to the point I had to decide if I should replace the shocks ONLY, or the whole spring/shock unit... which I think is a strut.
After driving 1.0 for 15 years, I forgot that the front end of 2.0 is totally different. In 1.0, you could easily replace the shock alone. But after searching for new shocks online, and looking at my Ford shop manual, I came to the realization that no matter what, you need to take the spring and shock out TOGETHER, because to replace the shock you need to use a spring compressor.
SO, go with just new shocks to save money, but pay for more labor? Pay more for parts, but for less labor? I asked Taxi Guy and he said "get the complete units if you can", which I did. The last 2 correct Motorcrafts that Rock Auto had in stock were shipped to me and the job was done on 5/28/18.
The maiden voyage with the upgrades wasn't what I expected. The rest of the suspension was still worn, after all. And I had to remind myself that this wasn't Ma's 1999 Town Car! New springs and shocks on a police package car does not mean a "Cloud-like Ride"! But I did notice improvements while banging over local potholes. It was on the highway that I noticed the improvement more.
Bridge expansion joints are much better now. And it seems that high-speed turns are better as well. In fact, and I didn't tell you this, I managed to out-accelerate and out-drive a rather new Mercedes SUV in tight traffic. He was attempting to make some stupid, aggressive moves and I sorta ruined that for him...................
While taking the photos for this post, I was surprised to see how clean things look under the front of 2.0. I have had far fewer glances under this car than 1.0. I only wish the body was as solid...
After driving 1.0 for 15 years, I forgot that the front end of 2.0 is totally different. In 1.0, you could easily replace the shock alone. But after searching for new shocks online, and looking at my Ford shop manual, I came to the realization that no matter what, you need to take the spring and shock out TOGETHER, because to replace the shock you need to use a spring compressor.
SO, go with just new shocks to save money, but pay for more labor? Pay more for parts, but for less labor? I asked Taxi Guy and he said "get the complete units if you can", which I did. The last 2 correct Motorcrafts that Rock Auto had in stock were shipped to me and the job was done on 5/28/18.The maiden voyage with the upgrades wasn't what I expected. The rest of the suspension was still worn, after all. And I had to remind myself that this wasn't Ma's 1999 Town Car! New springs and shocks on a police package car does not mean a "Cloud-like Ride"! But I did notice improvements while banging over local potholes. It was on the highway that I noticed the improvement more.
Bridge expansion joints are much better now. And it seems that high-speed turns are better as well. In fact, and I didn't tell you this, I managed to out-accelerate and out-drive a rather new Mercedes SUV in tight traffic. He was attempting to make some stupid, aggressive moves and I sorta ruined that for him...................
While taking the photos for this post, I was surprised to see how clean things look under the front of 2.0. I have had far fewer glances under this car than 1.0. I only wish the body was as solid...
Subscribe to:
Posts (Atom)

.jpg)