ADDITION TO THE FLEET: 2016 Ford Police Interceptor Utility... aka: Explorer

In March 2020 Mystery Mechanic added the first Ford Police Interceptor Utility (aka: Explorer) to his fleet.  It is a 2016 with about 95,000 miles on it.  He's not sure if he's going to replace the Taurus with it or not.  For now, we are working on making it neater and seeing if it needs any mechanical work.  Weather has prohibited any real down-and-dirty-dirt-removal.

As you can see in this (crummy) cell phone pic, it was originally black and white.  The good thing is the white was a WRAP, so no painting was needed to make it all black!

Still dirty, but doors unwrapped, roof still white...

A bit cleaner... until the rains came...

HOW TO Change a Cabin Filter in a 2016 Ford Explorer / Police Interceptor Utility

The following is a pictorial guide to changing the cabin filter in a 2016 Ford Police Interceptor Utility, aka Explorer.  From what I have seen, this procedure SHOULD be the same for police and civilian models up to the 2019 model year.

(NOTE: things didn't go quite as planned, so I don't have as many photos to share as I should)

This is the filter I picked up at the dealer, Motorcraft FP-68.  It wasn't cheap... Not sure why it cost more this time than the one I installed into the Sedan!

You will need to semi-remove the glove box door for easier access to the old filter.  Remove everything from the glove box FIRST!  That's right, all the sugar packets and napkins from Dunkin Donuts, etc.  

There is an ELASTIC TETHER that slides into a hole on the right side of the glove box door.  It helps the door from opening too far.  Slide that off.

At the top of the glove box opening, there are TWO PLASTIC TABS THAT POINT DOWNWARD.  They also help to retain the door when it is open.  I pushed them backward instead of forward so as not to break them off, but basically you need to get them out of the way of the glove box door so it will open all the way.

Now, I did NOT take the glove box door off to install the filter.  You MIGHT want to, though, as just as I thought I was done and happy, the door somehow got bumped and part of the hinge popped off.  I'll get into that debacle later...

This is what you see when you look into the glove box opening.  It is just like in the Taurus.  Basically there is a little cover, or "trap door", if you will, that has two latches and two tabs.  Undo the latches, and slide the cover down. 

This is what the cover looks like (front & back), with the tabs and latches where you can see them.

Here's the old filter still in place.  You may need a small screwdriver to help nudge it out a bit so you can get a better grip, then just slide it out.

We don't know if the filter had ever been changed, but it sure needed to be!

The new filter in place.  I added the date and mileage for future reference.

All you need to do now is reinstall the little filter cover, reattach the elastic tether to the side of the glove box door, and close it.

NOW, if you find yourself needing to remove OR reinstall the door, you need to know that there are two white plastic pins which actually come out.  We didn't know that, so when one side of the door popped off the pin, we didn't know how to reattach it.  A peek at the 'net resulted in the realization that one of the two plastic pins was not installed properly.  It was basically jammed into the wrong position.

After much car-repair-Yoga, temper flaring and use of large tools, I got both pins out.  We then put the cover in place, latched it, and slid the pins into place the way they are supposed to be installed... minus the fact we still need to lock them in.  In the photo below, you can see one and how it is slightly off-kilter.  But you get the idea.

This is a shot of an Explorer in a junk yard.  Someone had broken off the glove box door.  You can see the two white plastic pins which act as pivots.  The door is NOT SUPPOSED TO PRESS ONTO THOSE PINS!  Remember that if you find your door has popped off BUT the corresponding attachment hasn't broken off and flown off into oblivion...

And there you have it... your Interceptor will now smell like a daisy!!

(... well... a little better than before, anyhow...)

HOW TO Change a Cabin Filter in a 2013 Ford Taurus / Police Interceptor Sedan

The following is a pictorial guide to changing the cabin filter in a 2013 Ford Police Interceptor Sedan, aka Taurus.  From what I have seen, this procedure SHOULD be the same for police and civilian models up to the 2019 model year.

First, get yourself a brand spankin' new filter.  We went with a Motorcraft FP-68 (AE9Z-19N619-A).

You will need to remove the glove box for easier access to the old filter.  Basically, you squeeze the sides of the box so that it opens all the way... then it falls out and everything falls onto the floor, which is why you will remove everything from the glove box FIRST!

Prior to starting this project, I watched some videos online so I would know exactly where to look for the filter.  So when I stuck my head under the dash I started to worry, because I didn't see ANYTHING that looked like the slot where the filter lives.  I kept following the vent ducts and didn't see a darn thing... Then I got mad and looked straight forward, and THERE IT WAS.

Basically there is a little cover, or "trap door", if you will, that has two latches and two tabs.  Undo the latches, and slide the cover down.  Now you will see the nasty old filter staring at you.  Slide it out and marvel at the nastiness!

As you can see, the cabin filter DOES actually DO something!  This vehicle started life 130,940 miles ago as a police cruiser in New Hampshire, which may explain all of the pine needles and dried leaf bits...

I wrote the mileage and date onto the new filter, just to be anal...

 

Make sure there's no leftover nastiness in the air-box, and install the new filter.

Now you can reinstall the glove box.  This means you can reorganize all of the old registrations, inspection receipts, and sugar packets.  NOTE that the left side of the glove box has some sort of plastic limiter which fell apart when I tried to reinstall the box.  One end has a tab that slides into a slot on the box.  This part connects to a second part with an odd elastic fitting.  I think I got everything back together correctly.

Brand New 2016 Ford Interceptor Utility Spotted

Brand New 2016 Ford Interceptor Utility spotted at Gateway Ford in VT (6/6/15)

Ford's 2016 Police Interceptor Utility Goes RoboCop

(SOURCE:  FoxNews.com 2/11/15)

Ford’s police fleet has a new recruit.

The 2016 Police Interceptor Utility bows at the Chicago Auto Show this week featuring fresh looks and some nifty new tech. The Explorer-based cruiser has firmly grasped the mantle handed to it by the classic Crown Victoria Interceptor since it went on sale in 2012, and now accounts for over half of the police cars sold in the USA, outselling even Ford’s own Taurus-based Police Interceptor Sedan by a 2 to 1 margin.

The new model gets updated front and rear bodywork and lights, plus a freshened interior design that includes plenty of police-specific equipment like utility belt-friendly seats and an interior dome light that can be switched from white to red for better night vision. There’s also an optional surveillance system that can detect potential bad guys sneaking up on the vehicle from the rear like and alert the passengers while automatically closing the windows and locking the doors. It's almost like having RoboCop on board.

All-wheel-drive is standard, and departments can order the Police Interceptor Utility with either a 304 hp 3.7-liter V6 for regular duty, or a 365 hp 3.5-liter twin-turbo V6 if they need to tow or see a lot of high speed action in their precinct. In either case, they’re both pursuit-rated and the vehicles automatically switch into a special Pursuit Mode if they sense that they’re being driven hard, which changes the transmission logic to stay in gear during maneuvers and optimizes the all-wheel-drive system to facilitate action-movie style J-turns.

Look for one approaching in your rearview mirror this summer, and please pull over when you do.